Over Speed Indication And Automatic Accident Avoiding System For Four Wheeler

Over Speed Indication And Automatic Accident Avoiding System For Four Wheeler 

Why Over Speed Indication And Automatic Accident Avoiding System For Four Wheeler ?

 ALMOST all roads have specific road limits.Generally its difficult for driver to always look out for speed limit signs and adjust his speed accordingly.Over speed indicator is a device that tells the driver if he is exceeding the speed limit.With OVER SPEED INDICATOR,        you  can   be  sure   that   you   are   not   going  get   yourself   booked  for   over   speeding .

The   system   has   a   computer  which  stores   the   speed   limits   of  different   areas. The   GPS in  the  system

 feeds   the   exact   location   of  t he  car  to  the  computer  which  looks  up in  its  database to determine the 

permissible  speed  for  the  area and limits the car within the allowable speed.

Accident  Avoidance Systems in a four wheeler is a cocktail of several technological marvels.

1.EMERGENCY  BRAKE  ASSIST (EBA) : 

In an emergency,many people do not depress the brake pedal hard enough. EBA senses an 

emergency braking situation and helps the driver to reduce speed in the shortest distance possible.

2.DYNAMIC STABILITY AND TRACTION CONTROL (DSTC)

DSTC makes driving on twisty and slippery road conditions safer, by using sensors to detect whether any of the wheels is losing TRACTION. 

DSTC has the ability to cut the power in a flash,helping the car to regain its grip.If in any case the car shows a tendency to skid the,system automatically slows the particular wheels to maintain control.

3.ELECTRONIC BRAKE DISTRIBUTION (EBD)

EBD makes sure that the braking forces of the car are distributed between the front and the rear brakes in order to optimize the braking efficiency.

4.ANTI-LOCK BRAKING SYSTEM (ABS) :

With ABS you can brake as hard as you can and steer yourself to safety without the fear of wheels locking up and skidding.

5.BLIND SPOT INFORMATION SYSTEM (BSIS) 

Using cameras set just below the outer rare view mirrors, the BSIS tell you if there is any vehicle in your blind spot.

6.NIGHT VISION 

Driving during the night becomes safe than ever with the night vision where one can see clearly on the control display even in pitch black. THANKS TO INFRA RED TECHNOLOGY !!!

READ FULL VERSION OF THIS PROJECT ! I HOPE U LIKE THIS PROJECT

ABSTRACT:

This system is used to monitor speed of the vehicle and to avoid the accident by using the proximity sensors.

This over speed indication and automatic accident avoiding system senses the opposite vehicle by the ir proximity detector and stops both the engines and applies auto braking thus preventing the accident. This system is used to read and control the data from the vehicles. And then process it by using microcontroller. The lcd module displays the rpm and the speed of the vehicle. For over speed the alarm raises and alerts the driver.

This contains,
1) Accident sensing module and
2) Rpm Monitoring System

Advantage of these Systems:

1) Save Energy using automatic control systems
2) Less cost to communicate
3) Less power to automate

SOURCE:AUTOMIIZ-EMBEDDED INNOVATIVE TECHNOLOGY